Reclining Mechanism that Makes It Easy for the Patient to Sit and
for the Doctor to Perform the Procedure

A chair-type operating table with the lowest position of 485 mm for patient’s sitting comfort. Converts to surgical position with a push of a programmable setting switch (PRESET switch). The height can also be adjusted within the 285 mm lifting stroke range. After surgery, the patient can be smoothly converted to a chair position with a single push of the programmable return switch(AUTO RETURN switch). Smooth and quiet operation due to hydraulic mechanism.　　　　　　　　　　　　　　　　　　　　　　

Sliding Mechanism for Headrests to Absorb Differences in Patient Height

The headrest can be extended and retracted by foot control operation to absorb differences in patient height.

Chair-type Operating Table Provides Ample Room for Doctor’s Legs

The chair-type operating table with casters stored inside the main body allows for more leg room for the doctor.

In addition, MEPRO 5 has a motorized headrest elevation and tilt mechanism, making the backrest and headrest thinner than our previous products. This further reduces knee interference during the procedure. The slim and flat backrest provides a more comfortable surgical posture.

Layout Can Be Changed More Efficiently for Surgery on Either the Left or Right Eye.

Equipped with an axis rotation mechanism, layout changes can be made more smoothly according to the positioning of the left and right eye.

When unlocked, the table can rotate around the elevation mechanism（Manual operation） . Rotation can be locked at any position within the range.

Rechargeable Foot Control

The foot control is rechargeable; one charge provides approximately 40 days of use (when new). When the battery charge is low, the remaining battery charge indicator lamp informs the user of the remaining charge level in four levels. Even in the unlikely event that the battery charge runs out, it can be used as a wired foot control by connecting the connection cable. Connecting the cable starts charging the foot control (the connecting cable can be stored on the back of the foot control).